GW Instek GPT-10000 Series - Page 133

OPERATION
133
Display Set Setting
Description
The Display Set page includes both brightness
level and language settings.
Steps
1. Press the SYSTEM button on the
front panel when the tester is
under READY status in either
MANU or AUTO test.
2. The SYSTEM page will be shown
where DISPLAY SET is on top of
the left-side list. Press the ENTER
soft-key to enter the setting page.
3. Use the scroll wheel to set the
Brightness level.
LCD Brightness
1 bar (low) ~ 10 bars (high)