To Next Page

To Previous Page

OPERATION

135

Buzzer Settings

Description

The Buzzer settings allow you to set the volume

of buzzer sound for PASS/FAIL judgments.

Also, it is available to set Key Sound for buttons

being pressed.

Steps

1. Press the SYSTEM button on the

front panel when the tester is

under READY status in either

MANU or AUTO test.

2. The SYSTEM page will be shown.

Press the UP/DOWN arrow soft-

keys to move the cursor to the

BUZZER setting.

3. Press the ENTER soft-key to enter

the Volume setting followed by

using the scroll wheel to set the

Volume level.

GW Instek GPT-10000 Series User Manual

Questions and Answers: