APPENDIX
269
TIME OVER 240s
(GPT-15XXX)
TIME OVER 240s is displayed when, under
ACW test mode, HI SET is greater than
80mA and the RAMP TIME plus the TEST
TIME setting is > 240 seconds.
TEST TIME<0.5s is displayed when test time,
under IR test mode with Ground mode ON,
is below 0.5 second.
Setting error in CONTACT of ACW, DCW or IR.
The learned reference value of CONTACT
CHK is less than 30uA and thus CONTACT
CHK function will be invalid.
Setting error in IR Mode Filter
To Next Page
Loading...
