GW Instek GPT-10000 Series User Manual

OPERATION
93
READY status
2. Press the START button when the
tester is in the READY status. The
manual test starts accordingly and
the tester goes into the TEST status.
TEST status
3. The test will start by showing the ongoing ramp
up time followed by the ongoing test time and
the ongoing ramp down time. The test will
continue until the test is finished or stopped.

GW Instek GPT-10000 Series Specifications

General

Brand	GW Instek
Model	GPT-10000 Series
Category	Measuring Instruments
Language	English