H3C UniServer R6900 G3 User Manual

5-1
5 Configuring the server
The following information describes the procedures to configure the server after the server
installation is complete.
Configuration flowchart
Figure 5-1 Configuration flowchart
Powering on the server
1. Power on the server. For information about the procedures, see "Powering on the server."
2. Verify that the health LED on the front panel is steady green, which indicates that the system is
operating correctly. For more information about the health LED status, see "LEDs and buttons."

H3C UniServer R6900 G3 Specifications

General

Brand	H3C
Model	UniServer R6900 G3
Category	Server
Language	English