Appendix A: Software Download
© Harmonic Inc. Manual p/n 101543/Ver 1.0 A-12 ProView 2900 Series/SW Version 1.94
Figure A-17: ProView 2900 Boot Application Starts
The following screen displays the ProView 2900 Boot Software download menu:
MPEG
MPEGMPEG
MPEG-
--
-2 DVB/ATSC I.R.D
2 DVB/ATSC I.R.D 2 DVB/ATSC I.R.D
2 DVB/ATSC I.R.D -
--
- BOOT APPLICATION
BOOT APPLICATION BOOT APPLICATION
BOOT APPLICATION
UPGRADE Thru’ SERIAL
UPGRADE Thru’ SERIAL UPGRADE Thru’ SERIAL
UPGRADE Thru’ SERIAL -
--
- Progress = 14%
Progress = 14% Progress = 14%
Progress = 14%
After download is complete, the ProView 2900 restarts the standard operation with the new
software version.
3. To use the Boot Application, type “upgrade_sw applic”. The ProView 2900
starts "erasing flash" and after few minutes (after Erasing Flash Completed
Successfully) the “Ready for Receive...” message is displayed. Continue loading
the new version according to the standard procedure.
To Next Page
Loading...
