smart.Turn units | Units – Recessing
2
104
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
ICP recessing unit
G870 generates a recess defined by G22-Geo. The control uses
the tool definition to distinguish between external and internal
machining, or between radial and axial recesses.
Unit name: G870_ICP / cycle: G870
Further information: "Recessing cycle G870", Page 334
Contour form:
I: Allowance
EZ: Delay after recessing path (default: time for one spindle
revolution)
Further parameters of the Contour form:
Further information: "Contour form", Page 80
Further forms:
Further information: "smart.Turn unit", Page 78
Access to the technology database:
Machining operation: Recessg
Affected parameters: F, S
To Next Page
Loading...
