DIN/ISO programming | Datum shifts
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
307
Absolute datum shift G59
G59 sets the workpiece datum to the defined value in the selected
axis. The new workpiece datum remains in effect to the end of the
program.
Parameters:
X: Shift (radius)
Y: Shift (machine-dependent)
Z: Shift
U: Shift (machine-dependent)
V: Shift (machine-dependent)
W: Shift (machine-dependent)
G59 cancels all previous datum shifts (with G51, G56 or
G59).
Example: G59
. . .
N1 G59 Z256
Datum shift
N2 G14 Q0
N3 T3 G95 F0.25 G96 S200 M3
N4 G0 X62 Z2
. . .
To Next Page
Loading...
