HEIDENHAIN CNC PILOT 640 - Rectangle in YZ Plane G385-Geo; Polygon in YZ Plane G387-Geo

DIN/ISO Programming for the Y axis | Contours in the YZ plane
6
582
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Rectangle in YZ plane G385-Geo
G385 defines a rectangle in the YZ plane.
Parameters:
Z: Center of rectangle
Y: Center of rectangle
X: Reference diameter
No input: X from section code
X overwrites X from section code
A: Position angle (reference: positive Z axis; default: 0°)
K: Length of rectangle
B: Breadth of rectangle
R: Chamf./round. (default: 0)
R > 0: Radius of rounding arc
R < 0: Chamfer width
P: Depth/Height (default: P from G308)
Polygon in YZ plane G387-Geo
G387 defines the contour of an eccentric polygon in the YZ plane.
Parameters:
Z: Center of polygon
Y: Center of polygon
X: Reference diameter
No input: X from section code
X overwrites X from section code
Q: Number of corners (Q >= 3)
A: Position angle (reference: positive Z axis; default: 0°)
K: +edge lngth/-width a. flats
K > 0: Edge length
K < 0: Width across (Inside diameter)
R: Chamf./round. (default: 0)
R > 0: Radius of rounding arc
R < 0: Chamfer width
P: Depth/Height (default: P from G308)