HEIDENHAIN CNC PILOT 640 - Parallel Editing; Screen Layout

NC programming | Fundamentals: smart.Turn editor
1
48
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Parallel editing
Up to six NC programs can be opened simultaneously in
smart.Turn operating mode. The editor shows the names of the
open programs in the tab bar. If you have changed the NC program,
the editor displays the name in red.
You can program in the smart.Turn operating mode while the
machine is running a program in the automatic mode.
The smart.Turn operating mode saves all open
programs every time the operating mode is switched
The program running in the automatic mode cannot
be edited
Screen layout
1 Menu bar
2 NC program bar with the names of the loaded NC programs.
The selected program is marked
3 Program window
4 Contour display or large program window
5 Soft keys
6 Status bar
1
2
3
4
5
6