Touch probe cycles | In-process measrmnt.
5
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
563
5.9
In-process measrmnt.
Measure workpieces (option)
In-process measrmnt. is measurement at the workpiece with a
touch probe located in a tool holder of the machine. In the tool list,
enter your touch probe as a new tool. Use the tool type Measure
probe. The following cycles for In-process measrmnt. are basic
cycles for probing functions that you can use to program individually
adapted probing sequences.
Switch on measurement G910
G910 activates the selected Measure probe.
Parameters:
V: Tool probe(1)/work probe(0)
0: Touch probe (for workpiece measurement)
1: Table-mounted touch probe (for tool measurement)
D: Axis number
Example: In-process measrmnt.
. . .
N1 G0 X105 Z-20
N2 G94 F500
N3 G910 V0 D1
N4 G911 V0
N5 G1 Xi-10
N6 G914
N7 G912 Q1
N8 G913
N9 G0 X115
N10 #l1=#a9(X,0)
N11 IF NDEF(#l1)
N12 THEN
N13 PRINT("Probe not reached")
N14 ELSE
N4 PRINT ("Result of measurement:",#l1)
N4 ENDIF
. . .
To Next Page
Loading...
