HEIDENHAIN CNC PILOT 640 - Feed rate, shaft speed

DIN/ISO programming | Feed rate, shaft speed
4
296
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
4.11 Feed rate, shaft speed
Speed limitation G26
The Speed limitation remains in effect until the end of the program
or until a new value is programmed for G26 or Gx26.
G26: Main spindle
Gx26: Spindle x (x: 1...3)
Parameters:
S: Maximum Speed
If S > absolute maximum speed (machine parameter), the
parameter value will apply.
Example: G26
. . .
N1 G14 Q0
N1 G26 S2000
Maximum speed
N2 T3 G95 F0.25 G96 S200 M3
N3 G0 X0 Z2
. . .
Reduce rapid traverse G48
The reduction of the rapid traverse rate remains in effect until the
end of the program or until G48 is programmed again without input
values.
Parameters:
F: Max. feed in mm/min for linear axes or °/min for rotary axes
D: Axis number
1: X
2: Y
3: Z
4: U
5: V
6: W
7: A
8: B
9: C