HEIDENHAIN CNC PILOT 640 - Units - Milling in Y axis group

Overview of units | Units – "Milling in Y axis" group
9
670
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
9.6 Units – "Milling in Y axis" group
Milling in front face group (XY plane)
Unit Description Page
G840_Kon_Y_Stirn G840 Contour milling
Machining contours in the XY plane inside, outside and on the contour
Page 216
G845_Tas_Y_Stirn G845 Pocket milling
Inside rough-out of closed contours in the XY plane
Page 217
G840_ENT_Y_STIRN G840 Deburring
Deburring contours in the XY plane
Page 218
G801_GRA_STIRN_C G841 Single surf.
Milling a single surface (flat) in the XY plane
Page 219
G840_Kon_C_STIRN G843 Centric polygon
Milling a centric polygon in the XY plane
Page 220
G803_GRA_Y_STIRN G803 Engraving
Engraving character strings in the XY plane
Page 228
G800_GEW_Y_STIRN G800 Thread milling
Milling a thread in an existing hole in the XY plane
Page 229
Milling in lateral surface group (YZ plane)
Unit Description Page
G840_Kon_Y_Mant G840 Contour milling
Machining contours in the YZ plane inside, outside and on the contour
Page 223
G845_Tas_Y_Mant G845 Pocket milling
Inside rough-out of closed contours in the YZ plane
Page 224
G840_ENT_Y_MANT G840 Deburring
Deburring contours in the YZ plane
Page 225
G801_GRA_STIRN_C G841 Single surf.
Milling a single surface (flat) in the YZ plane
Page 226
G840_Kon_C_STIRN G843 Centric polygon
Milling a centric polygon in the YZ plane
Page 227
G804_GRA_Y_MANT G803 Engraving
Engraving character strings in the YZ plane
Page 228
G806_GEW_Y_MANT G800 Thread milling
Milling a thread in an existing hole in the YZ plane
Page 229