HEIDENHAIN CNC PILOT 640 - Full Circle in XY Plane G374-Geo; Rectangle in XY Plane G375-Geo

DIN/ISO Programming for the Y axis | Contours in the XY plane
6
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
573
Full circle in XY plane G374-Geo
G374 defines a Full circle in the XY plane.
Parameters:
X: Center (radius)
Y: Center
R: Radius
P: Depth/Height (default: P from G308)
P < 0: Pocket
P > 0: Island
I: Limit diameter (as cutting limit)
No input: X from section code
I overwrites X from section code
Rectangle in XY plane G375-Geo
G375 defines a rectangle in the XY plane.
Parameters:
X: Center of rectangle (radius)
Y: Center of rectangle
A: Position angle (reference: positive X axis; default: 0°)
K: Length of rectangle
B: Breadth of rectangle
R: Chamf./round. (default: 0)
R > 0: Radius of rounding arc
R < 0: Chamfer width
P: Depth/Height (default: P from G308)
P < 0: Pocket
P > 0: Island
I: Limit diameter (as cutting limit)
No input: X from section code
I overwrites X from section code