HEIDENHAIN CNC PILOT 640 - Datum Shift G51

DIN/ISO programming | Datum shifts
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
305
Datum shift G51
G51 shifts the workpiece datum by the defined value in the
selected axis. The Displacement is referenced to the workpiece
datum defined in setup mode.
Parameters:
X: Shift (radius)
Y: Shift (machine-dependent)
Z: Shift
U: Shift (machine-dependent)
V: Shift (machine-dependent)
W: Shift (machine-dependent)
Example: G51
. . .
N1 T3 G95 F0.25 G96 S200 M3
N2 G0 X62 Z5
N3 G810 NS7 NE12 P5 I0.5 K0.2
N4 G51 Z-28
Datum shift
N5 G0 X62 Z-15
N6 G810 NS7 NE12 P5 I0.5 K0.2
N7 G51 Z-56
Datum shift
. . .