HEIDENHAIN CNC PILOT 640 - Circular Slot in YZ Plane G382;G383-Geo; Full Circle in YZ Plane G384-Geo

DIN/ISO Programming for the Y axis | Contours in the YZ plane
6
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
581
Circular slot in YZ plane G382/G383-Geo
G382 and G383 define a circular slot in the YZ plane.
G382: Circular slot clockwise
G383: Circular slot counterclockwise
Parameters:
Z: Center of slot
Y: Center of slot
X: Reference diameter
No input: X from section code
X overwrites X from section code
R: Radius
A: Start angle (reference: positive X axis; default: 0°)
W: Final angle (reference: positive X axis; default: 0°)
B: Breadth
P: Depth/Height (default: P from G308)
Full circle in YZ plane G384-Geo
G384 defines a full circle in the YZ plane.
Parameters:
Z: Center
Y: Center
X: Reference diameter
No input: X from section code
X overwrites X from section code
R: Radius
P: Depth/Height (default: P from G308)