HEIDENHAIN CNC PILOT 640 - Linear Slot Pattern, Lateral Surface Unit

smart.Turn units | Units – milling, lateral surface (C axis)
2
184
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Linear slot pattern, lateral surface unit
The unit machines a linear slot pattern in which the individual
features are arranged at a regular spacing on the lateral surface.
The Start point of the slots correspond to the pattern positions.
You define the Slot length and the position of the slots in the
unit. The slot width equals the diameter of the milling cutter.
Unit name: G792_Lin_Mant_C / cycle: G792
Further information: "Linear slot, lat. surface G792", Page 407
Pattern form:
Q: Number of slots
Z1: Start point pattern – position of first slot
C1: Start. angle
Wi: End angle – Angle increment
W: Final angle
Z2: End point pattern
Cycle form:
X1: Upper edge of milling
X2: Milling floor
L: Slot length
A1: Angle to Z axis (default: 0°)
P: Maximum infeed
FZ: Approach feed (default: active feed rate)
Further forms:
Further information: "smart.Turn unit", Page 78
Access to the technology database:
Machining operation: milling
Affected parameters: F, S, FZ, P