HEIDENHAIN CNC PILOT 640 - Information to DNC G941; Misalignment Compensation G976

DIN/ISO programming | Other G codes
4
446
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Information to DNC G941
G941 enables you to send your own messages from the NC program
via the HEIDENHAIN DNC interface.
The messages sent are evaluated by appropriate PC applications,
such as StateMonitor.
Parameters:
ID: Output text – text and optional definition of format of output
values (max. 80 characters)
Examples of output format:
%f – output of a floating point number in original format
(contents of parameter R)
%.0f – output of a floating point number without decimal
places
%.1f – output of a floating point number with one decimal
place
%+.2f – output of a floating point number with algebraic sign
and two decimal places
R: Output value – value or variable
Examples of output values:
Value, e.g. 3.15
Variable, e.g. #l1
Example: G941
N 46 #l1=#l1+1
Part counter
N47 G941 ID"STUECKZAHL" R#l1
Send message
Misalignment compensation G976
With the Misalignment compensation G976 function you can run
the following operations on tapering contours (e.g. to counter a
mechanical offset). The G976 function is automatically reset at the
end of the program. You can also deactivate the function through
another call with the setting H0 (off).
Parameters:
Z: Start point
K: Length
I: Incremental distance
J: Incremental distance
H: G976 code On=1 Off=0
0: Off
1: On