HEIDENHAIN CNC PILOT 640 - Units - Drilling, Predrilling in y Axis Group

Overview of units | Units – "Drilling, predrilling in Y axis" group
9
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
669
9.5 Units – "Drilling, predrilling in Y axis"
group
"ICP drilling, Y axis" group
Unit Description Page
G74_ICP_Y G74 Drilling in ICP Y
Drilling and pecking with ICP pattern
Page 204
G73_ICP_Y G73 Tapping in ICP Y
Tapping with ICP pattern
Page 205
G72_ICP_Y G72 Boring, cntrsinkg ICP Y
Countersinking with ICP pattern
Page 206
"Predrilling in Y axis" group
Unit Description Page
DRILL_STI_840_Y G840 ICP predrilling, contour milling in XY plane
Determine the predrilling position and machine a hole
Page 211
DRILL_STI_845_Y G845 ICP predrilling, pocket milling in XY plane
Determine the predrilling position and machine a hole
Page 213
DRILL_MAN_840_Y G840 ICP predrilling, contour milling in YZ plane
Determine the predrilling position and machine a hole
Page 214
DRILL_MAN_845_Y G845 ICP predrilling, pocket milling in YZ plane
Determine the predrilling position and machine a hole
Page 215