DIN/ISO programming | Programming variables
4
470
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Reading general NC information
Use the following syntax to read general NC information.
Identification codes for tool information
#i1
Current operating mode
#i2
Active unit of measure (inches/metric)
#i3
Main spindle = 0
Counterspindle with mirroring Z = 1
Tool mirroring in Z = 2
Tool + path mirroring in Z = 3
#i4 G16 active = 1 (currently not used)
#i5
Last programmed tool number
#i6
Start block search active = 1
#i7
System is DataPilot = 1
#i8
Selected language
#i9
If Y axis is configured = 1
#i10
If B axis is configured = 1
#i11
If the tool pocket in X is mirrored to the machine
system = 1
#i12
If U axis is programmable = 1
#i13
If V axis is programmable = 1
#i14
If W axis is programmable = 1
#i15
If U axis is configured = 1
#i16
If V axis is configured = 1
#i17
If W axis is configured = 1
#i18
Datum shift of the Z axis
#i19
Datum shift of the X axis
#i20 Last programmed path function (G0, G1, G2...)
#i21
Current quantity (workpiece counter)
#i22
If U axis is coupled with X axis = 1
#i23
If V axis is coupled with Y axis = 1
#i24
If W axis is coupled with Z axis = 1
#i25
If magazine exists = 1
#i26
P key of actual tool *10 from tool preselection
#i27
P key of desired tool *10 from tool preselection
#i28
Angle of oblique axis Y
#i29
P key of the tool *10 that has reached the maximum
tool life
#i30
P key of the tool *10 that has reached the maximum
workpiece quantity
#i99
Return code of subprograms
To Next Page
Loading...
