HEIDENHAIN CNC PILOT 640 - Feed Per Revolution G95-Geo

DIN/ISO programming | Attributes for contour description
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
269
Feed per revolution G95-Geo
G95 influences the finishing feed rate of G890 for basic contour
elements and form elements.
Parameter:
F: Feed per revolution
The G95 finishing feed rate replaces a finishing feed
rate defined in the machining section.
G95 is modal
To cancel a finishing feed rate set with G95, program
G95 without an input value.
Example: Attributes in contour description G95
. . .
FINISHED PART
N1 G0 X0 Z0
N2 G1 X20 BR-1
N3 G1 Z-20
N4 G25 H5 I0.3 K2.5 R0.6 W15
N5 G1 X40 BR-1
N6 G95 F0.08
N7 G1 Z-40
N8 G25 H5 I0.3 K2.5 R0.6 W15 BF0
N9 G95
N10 G1 X58 BR-1
N11 G1 Z-60
. . .