DIN/ISO programming | Front and rear face machining
4
394
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
4.24 Front and rear face machining
Rapid traverse on front/rear face G100
G100 moves at rapid traverse along the shortest path to the Final
point.
With G100 the tool performs a linear movement.
To position the workpiece to a defined angle, use G110.
Parameters:
X: Final point (diameter value)
C: End angle
XK: Final point (Cartesian)
YK: Final point (Cartesian)
Z: Final point
Programming:
X, C, XK, YK, Z: Absolute, incremental or modal
Program either X–C or XK–YK
Example: G100
. . .
N1 T7 G197 S1200 G195 F0.2 M104
N2 M14
N3 G110 C0
N4 G0 X100 Z2
N6 G100 XK20 YK5
Rapid traverse, face
N7 G101 XK50
N8 G103 XK5 YK50 R50
N9 G101 XK5 YK20
N10 G102 XK20 YK5 R20
N11 G14
N12 M15
. . .
To Next Page
Loading...
