HEIDENHAIN CNC PILOT 640 - Units - Special Units Group

Overview of units | Units – "Special units" group
9
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
671
9.7 Units – "Special units" group
Unit Description Page
START Program beginning (START)
For functions required at the beginning of the program
Page 195
C_AXIS_ON C axis ON
Activate C-axis interpolation
Page 197
C_AXIS_OFF C axis OFF
Deactivate C-axis interpolation
Page 197
SUBPROG Subprogram call
Calling any desired subprogram
Page 198
REPEAT Process logic – repetition
Describing a WHILE loop to repeat parts of the program
Page 199
END Program end (END)
For functions required at the end of the program
Page 200