HEIDENHAIN CNC PILOT 640 - Contours in the YZ Plane; Starting Point of Contour in YZ Plane G180-Geo; Line Segment in YZ Plane G181-Geo

DIN/ISO Programming for the Y axis | Contours in the YZ plane
6
578
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
6.3 Contours in the YZ plane
Starting point of contour in YZ plane G180-Geo
G180 defines the Start point of a contour in the YZ plane.
Parameters:
Y: Start point of contour
Z: Start point
PZ: Start point (polar radius)
W: Start point (polar angle)
Line segment in YZ plane G181-Geo
G181 defines a line segment in a contour of the YZ plane.
Parameters:
Y: Final point
Z: Final point
AN: Angle to positive Z axis
Q: Intersect. pt. or Final point if the line segment intersects a
circular arc (default: 0)
0: Near point of intersection
1: Far point of intersection
BR: Chamf./round. – defines the transition to the next contour
element
When entering a Chamf./round., program the theoretical end
point.
No entry: Tangential transition
BR = 0: No tangential transition
BR > 0: Rounding radius
BR < 0: Width of chamfer
PZ: Final point (polar radius; reference: workpiece datum)
W: Final point (polar angle; reference: workpiece datum)
AR: Incr.angle to foregoer ARi (AR corresponds to AN)
R: Line length
Programming:
Y, Z: Absolute, incremental, modal or ?
ANi: Angle to the subsequent element
ARi: Angle to the previous element