HEIDENHAIN CNC PILOT 640 - Units - Predrilling in C axis group

Overview of units | Units – "Predrilling in C axis" group
9
666
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
9.3 Units – "Predrilling in C axis" group
"Predrilling in C-axis, face" group
Unit Description Page
DRILL_STI_KON_C Predrill face, G840 contour mill C
Determine the predrilling position and machine a hole
Page 137
DRILL_STI_840_C Predrill on face, G840 ICP in C
Determine the predrilling position and machine a hole
Page 141
DRILL_STI_TASC Predrill face G845, pocket mill in C
Determine the predrilling position and machine a hole
Page 139
DRILL_STI_845_C Predrill on face, G845 ICP in C
Determine the predrilling position and machine a hole
Page 142
Predrilling in C-axis, lateral surface
Unit Description Page
DRILL_MAN_KON_C Predrill latrl., G840 contour mill C
Determine the predrilling position and machine a hole
Page 143
DRILL_MAN_840_C Predrill lateral surf., G840 ICP in C
Determine the predrilling position and machine a hole
Page 147
DRILL_MAN_TAS_C Predrill face G845, pocket mill in C
Determine the predrilling position and machine a hole
Page 145
DRILL_MAN_845_C Predrill lateral surf., G845 ICP in C
Determine the predrilling position and machine a hole
Page 149