DIN/ISO programming | Programming in ISO Mode
4
244
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Geometry menu item
The Geo» (geometry) menu item contains functions for contour
description. In ISO Mode, press the Geo» menu item to call the
following menu items.
G: Direct entry of a G function
Line: entry of a line (G1)
Cir: description of a circular arc (G2, G3, G12, G13)
Form: description of form elements
Front: functions for contour descriptions on the front face
Lateral: functions for contour descriptions on the lateral surface
ICP, Extras, Graph.:
Further information: "Shared menu items", Page 51
Back to the DIN/ISO main menu
Machining menu item
The Mach» (machining) menu item contains functions for
programming the machining operation. In ISO Mode, press the
Mach» menu item to call the following menu items.
G: Direct entry of a G function
G-menu: menu items for machining tasks
M: Direct entry of an M function
M-menu: menu items for switching tasks
T: Direct tool call
F: Feed per revolution G95
S: Cutting speed G96
Extras, Graph.:
Further information: "Shared menu items", Page 51
Refer to your machine manual.
Your machine tool builder can also provide his own G-
code functions. You will find these functions in the
G-menu in Miscellaneous functions.
Back to the DIN/ISO main menu
To Next Page
Loading...
