HEIDENHAIN CNC PILOT 640 - Units - Drilling group

Overview of units | Units – "Drilling" group
9
664
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
9.2 Units – "Drilling" group
"Centric drilling" group
Unit Description Page
G74_Zentr G74 Centric drilling
Drilling and pecking with X=0
Page 105
G73_Zentr G73 Centric tapping
Tapping with X=0
Page 107
ICP drilling, C axis group
Unit Description Page
G74_ICP_C G74 Drilling in ICP C
Drilling and pecking with ICP pattern
Page 129
G73_ICP_C G73 Tapping in ICP C
Tapping with ICP pattern
Page 131
G72_ICP_C G72 Boring, cntrsinkg ICP C
Countersinking with ICP pattern
Page 132
"C-axis face drilling" group
Unit Description Page
G74_Bohr_Stirn_C G74 Single hole
Drilling and pecking a single hole
Page 110
G74_Lin_Stirn_C G74 Linear pattern drilling
Drilling and pecking a linear hole pattern
Page 112
G74_Cir_Stirn_C G74 Circ. pattern drilling
Drilling and pecking a circular hole pattern
Page 114
G73_Gew_Stirn_C G73 Tapping
Tapping a single hole
Page 116
G73_Lin_Stirn_C G73 Thread, linear pattern
Tapping a linear hole pattern
Page 117
G73_Cir_Stirn_C G73 Thread, circ. pattern
Tapping a circular hole pattern
Page 118