HEIDENHAIN CNC PILOT 640 - FRONT; REAR SIDE Section; LATERAL Section; FRONT y; REAR SIDE y Section

NC programming | Program section code
1
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
65
FRONT / REAR SIDE section
In this program section you describe the front and rear side
contours to be machined with the C axis. The program section
defines the position of the contour in Z direction.
Parameters:
Z: Position of the front/rear-face contour
LATERAL section
In this program section you describe the lateral surface contours
to be machined with the C axis. The program section defines the
position of the contour in X direction.
Parameters:
X: Reference diameter of lateral-surface contours
FRONT Y / REAR SIDE Y section
For lathes with Y axis, these program section codes define the
XY plane (G17) and the position of the contour in Z direction. The
Spindle angle (C) defines the spindle position.
Parameters:
X: Limit diameter – area diameter as cutting limit
Z: Reference dimension or Position – position of the reference
plane (default: 0)
C: Spindle angle or Angle (default: 0)