HEIDENHAIN CNC PILOT 640 - Activating Measuring Path Monitoring G911

Touch probe cycles | In-process measrmnt.
5
564
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Activating measuring path monitoring G911
G911 activates the measuring path monitoring. Then only a single
feed path is permissible.
Parameters:
V: Type of departure
0: Axes stay stationary with deflected touch probe
1: Axes automatically retract after deflection of the touch probe
R: Return path
Actual-value determination G912
G912 puts the positions at which the touch probe was deflected
into the result variables.
Parameters:
Q: Err. evaluation when the touch probe is not reached
0: Error message of NC, program stops
1: Error evaluation in the NC program, measuring
results=NDEF
The measurement results are available in the following
variables: #a9 (axis,channel)
Axis = axis name
Channel = channel number, 0 = current channel
Example: Measurement results
. . .
N1 #l1=#a9(X,0)
X value of current channel
N2 #l2=#a9(Z,1)
Z value of channel 1
N3 #l3=#a9(Y,0)
Y value of current channel
N4 #l4=#a9(C,0)
C value of current channel
. . .
End measuring G913
G913 ends the measuring process.
Deactivating measuring path monitoring G914
G914 deactivates the measuring-path monitoring.