HEIDENHAIN CNC PILOT 640 - Circular Slot on Lateral Surface G312-;G313-Geo; Full Circle on Lateral Surface G314-Geo

DIN/ISO programming | Lateral surface contours
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
287
Circular slot on lateral surface G312-/G313-Geo
G312 and G313 define a circular slot in a lateral-surface contour.
Direction of rotation:
G312: Circular slot clockwise
G313: Circular slot counterclockwise
Parameters:
Z: Center of slot
CY: Center as linear value (reference: unrolled Reference
diameter)
C: Center (angle)
R: Radius – curvature radius (reference: center point path of the
slot)
A: Start angle to Z axis (default: 0°)
W: Final angle to Z axis (default: 0°)
B: Breadth
P: Depth (default: P from G308)
Full circle on lateral surface G314-Geo
G314 defines a full circle in a lateral-surface contour.
Parameters:
Z: Center
CY: Center as linear value (reference: unrolled Reference
diameter)
C: Center (angle)
R: Radius
P: Depth (default: P from G308)