HEIDENHAIN CNC PILOT 640 - Editing with Active Tree View

NC programming | Fundamentals: smart.Turn editor
1
50
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Editing with active tree view
Press the right arrow key to expand the program
sections.
Position the cursor on the program line you want
to edit and press the right arrow key once again.
The control automatically changes to the DINplus
view.
Make the required changes
Use the left arrow key to return to the tree view
and to collapse the program section
You can adapt the tree view in the MACHINING section
to suit your requirements; for example, you can combine
multiple units to create a custom range of blocks. Define
the new range of blocks by inserting the DINplus word
BLOCKSTART at the beginning of the selected program
section and the DINplus word BLOCKEND at the end.
The DINplus words are available in the Extras menu in
the DINplus word… menu item.