DIN/ISO programming | Program templates
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
517
4.40 Program templates
Fundamentals
Refer to your machine manual.
This feature must be enabled and adapted by the
machine tool builder.
A program template is a predefined NC program. It defines the
structure for complex programming, for example. This reduces the
programming efforts.
Your machine tool builder can provide you with up to nine program
templates.
Opening a program template
In order to use the program templates defined by the machine tool
builder, create a new NC program from the template in smart.Turn
operating mode.
Proceed as follows:
Select the Prog menu item
Select the New menu item
Select the New program from template menu
item
Select the desired template
To Next Page
Loading...
