HEIDENHAIN CNC PILOT 640 - Misalignment Compensation after Angle Measurement G788

Touch probe cycles | Angular measurement
5
562
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Misalignment compensation after angle measurement
G788
Cycle G788 activates a misalignment compensation determined
with Cycle G787 Angle Measurement.
Parameters:
NF: Variable no. result – number of the first global variable in
which the result is saved (no input: Variable 810)
The second measurement result is saved automatically to the
next consecutive number.
P: Compensation:
0: OFF – do not perform misalignment compensation
1: ON – perform misalignment compensation
G788 Misalignment compensation after angle measurement
. . .
MACHINING
N3 G788 NF1 P0
. . .