HEIDENHAIN CNC PILOT 640 - Circular Slot on Lateral Surface G312;G313; Full Circle on Lateral Surface G314

DIN/ISO programming | Contour definitions in the machining section
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
343
Circular slot on lateral surface G312/G313
G312 and G313 define a circular slot in a lateral-surface contour.
Program this figure in conjunction with G840, G845 or G846.
Parameters:
Z: Center
CY: Center as linear value (reference: unrolled Reference
diameter)
C: Center (angle)
R: Radius
A: Start angle
W: End angle (reference: Z axis)
B: Breadth
P: Depth
Full circle on lateral surface G314
G314 defines a full circle in a lateral-surface contour. Program this
figure in conjunction with G840, G845 or G846.
Parameters:
Z: Center
CY: Center as linear value (reference: unrolled Reference
diameter)
C: Center (angle)
R: Radius
P: Depth