HEIDENHAIN CNC PILOT 640 - Page 469

DIN/ISO programming | Programming variables
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
469
Status of TRC/MCRC
#n40(G) 40: G40 active
41: G41 active
42: G42 active
Active wear compensation (G148)
#n148(O) 0: DX, DZ
1: DS, DZ
2: DX, DS
Pocket data of entered tool
#n601(n) S: Number of cutting edge
M: Magazine number
ppp: Pocket number
Output in the format SMppp
Free magazine pocket
#n610(H) M: Magazine number
ppp: Pocket number
Output in the format Mppp
Software limit switches
#n707(n,1)
Identification code of axis:
n: Axis X, Y, Z, U, V, W, A, B, C
1: Minimum value
2: Maximum value
Datum shift
#n920(G) Status of functions G920/G921:
0: G920/G921 not active
1: G920 active
2: G921 active