DIN/ISO programming | Other G codes
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
445
Reading the current NC information
#n0(Z)
Last programmed position Z
#n120(X)
Reference diameter X for calculating CY
#n57(X)
Oversize in X
#n57(Z)
Oversize in Z
#n58(P)
Equidistant oversize
#n150(X) Cutting width shifted in X by G150
#n95(F)
Last programmed feed rate
#n47(P)
Current safety clearance
#n147(I)
Current safety clearance in working plane
#n147(K)
Current safety clearance in infeed direction
Internal information for defining constants
__n0_x
768 Last programmed position X
__n0_y
769 Last programmed position Y
__n0_z
770 Last programmed position Z
__n120_x
787 Reference diameter X for calculating CY
__n57_x
791 Oversize in X
__n57_z
792 Oversize in Z
__n58_p
793 Equidistant oversize
__n150_x 794 Cutting width shifted in X by G150/G151
__n150_z 795 Cutting width shifted in Z by G150/G151
__n95_f
800 Last programmed feed rate
Fill variable memory G904
#a0(Z,1)
Datum shift of the Z axis of slide $1
#a1(Z,1)
Actual position of the Z axis of slide $1
#a2(Z,1)
Nominal position of the Z axis of slide $1
#a3(Z,1)
Lag error of the Z axis of slide $1
#a4(Z,1)
Distance to go in the Z axis of slide $1
To Next Page
Loading...
