Fundamentals | Notes in this documentation
4
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Notes in this documentation
Safety precautions
Comply with all safety precautions indicated in this document and
in your machine tool builder's documentation!
Precautionary statements warn of hazards in handling software
and devices and provide information on their prevention. They are
classified by hazard severity and divided into the following groups:
DANGER
Danger indicates hazards for persons. If you do not follow the
avoidance instructions, the hazard will result in death or severe
injury.
WARNING
Warning indicates hazards for persons. If you do not follow the
avoidance instructions, the hazard could result in death or
serious injury.
CAUTION
Caution indicates hazards for persons. If you do not follow the
avoidance instructions, the hazard could result in minor or
moderate injury.
NOTICE
Notice indicates danger to material or data. If you do not follow
the avoidance instructions, the hazard could result in things
other than personal injury, such as property damage.
Sequence of information in precautionary statements
All precautionary statements comprise the following four sections:
Signal word indicating the hazard severity
Type and source of hazard
Consequences of ignoring the hazard, e.g.: "There is danger of
collision during subsequent machining operations"
Escape – Hazard prevention measures
To Next Page
Loading...
