DIN/ISO programming | Milling cycles
4
432
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Cycle run:
1
Starting position (X, Z, C) is the position before the cycle begins
2 Calculates the number of cutting passes (infeeds to the milling
planes, infeeds in the milling depths)
3 Move to the safety clearance and plunge to the first milling
depth.
4 Mill the first plane.
5 Retract by the safety clearance, return and cut to the next
milling depth.
6 Repeat steps 4 and 5 until the complete area is milled.
7
Returns to Return plane RB
You can change the cutting direction with the cutting direction H,
the machining direction Q and the direction of tool rotation.
Pocket milling, finishing G846
Cutting direction Direction of tool
rotation
Execution
Up-cut milling (H=0)
Mx03
Up-cut milling (H=0)
Mx04
Climb milling (H=1)
Mx03
Climb milling (H=1)
Mx04
To Next Page
Loading...
