TURN PLUS | Automatic working plan generation (AWG) submode
7
622
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
NOTICE
Danger of collision!
In AWG submode with drilling and milling (e.g. Main mach.
operation 11: Milling) the control does not consider the current
turning situation—instead, the Finished part contour is used
as reference. Danger of collision during pre-positioning and
machining!
Program turning operations (e.g. Main mach. operation 3:
Roughing) before the drilling and milling operations
To Next Page
Loading...
