TURN PLUS | Example
7
648
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
Inserting chucking equipment:
Select the Head menu item
Select the Insert chucking equipment menu
item
Describe the chucking equipment:
Enter the No. of clamping
Select the Spindle number AWG
Select the Clamp type
Enter the Chuck jaw reference
Enter the Unclamping length
Enter the Cutting limit, outside
Enter the Cutting limit, inside
Enter the Overlap jaw/workpiece
Enter the Chuck diameter
Enter the Chuck form
Select Shaft machining AWG
TURN PLUS takes the chucking equipment and
cutting limitation into account for the program
creation
Press the Save soft key
Press the GO BACK soft key
To Next Page
Loading...
