HEIDENHAIN CNC PILOT 640 - Page 97

smart.Turn units | Units – Recessing
2
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
97
O: End of rough cut
0: Lift-up at rapid
1: Half recessng width 45°
U: End of finishing cut
0: Value from glob. param.
1: Parting horizntl. elem.
2: Complete horzntl. elem.
Further forms:
Further information: "smart.Turn unit", Page 78
Access to the technology database:
Machining operation: Contour recessing
Affected parameters: F, S, E