Effect Mode Options Descriptions
55 ______________________________________________________DML-1200 w/Axon Embedded Graphic Engine 24/12/2010
5.1 Effect Mode Color Options
5.1.1 All or Nothing
Effect Mode
parameter DMX value = 15
This effect reduces all color values to full saturation or no color based on comparison to a set threshold. This effect creates an
image with fully saturated color.
Modifier 1:
Compares the red component of a pixel to the threshold value and converts it to full color if it is greater than the
threshold and to black if it is below the threshold.
Modifier 2:
Compares the green component of a pixel to the threshold value and converts it to full color if it is greater than the
threshold and to black if it is below the threshold.
Modifier 3:
Compares the blue component of a pixel to the threshold value and converts it to full color if it is greater than the
threshold and to black if it is below the threshold.
5.1.2 Background Color
Effect Mode
parameter DMX value = 131
There is a default black background behind every composite image. You cannot rotate, scale or position the background and it is
visible from every viewpoint and position. This effect allows you to apply color to the background. This background color will not
affect any of the Graphic Object effects selected.
Modifier 1:
Defines the red color component from DMX values of 0 = no red to 255 (100%) = maximum red saturation.
Modifier 2:
Defines the green color component from DMX values of 0 = no green to 255 (100%) = maximum green saturation.
Modifier 3:
Defines the blue color component from DMX values of 0 = no blue to 255 (100%) = maximum blue saturation.
Object Effect Global Effect
riginal Content
Modifier 1 parameter DMX = 125
Modifier 2 parameter DMX = 140
Modifier 3 parameter DMX = 10
Object Effect Global Effect
Modifier 1 parameter DMX = 220
Modifier 2 parameter DMX = 97
Modifier 3 parameter DMX = 0
To Next Page
Loading...