Effect Mode Options Descriptions
DML-1200 w/Axon Embedded Graphic Engine 24/12/2010 _____________________________________________________________________________ 82
5.2.12 Film Noise
Effect Mode
parameter DMX value = 94
This effect creates the effect of scratches on film. You can adjust the amount of “noise” as well as the tint and “jitter” to give the
image an aged film effect.
Modifier 1:
Adjusts the noise rate. A DMX value of 128 (50%) pauses the noise. Values below the midpoint adjust the rate from 0 =
fastest to 127 = slowest. Values above the midpoint adjust the rate from 129 = slowest to 255 (100%) = fastest.
Modifier 2:
Shifts the color to a sepia tint, 128 = no adjustment, 0 to 127 = full sepia. Values above the midpoint of the range
repeat the push to sepia with jitter added from 129 (51%) = full color and no jitter to 255 (100%) = full sepia and maximum jitter.
Modifier 3:
Reduces the noise level from 0 = maximum noise to 255 (100%) = no noise.
5.2.13 Film Roll
Effect Mode
parameter DMX value = 53
This effect scrolls the media file texture horizontally or vertically independent from the 3-D object it overlays, and allows you to
control the scrolling speed and image scaling.
Modifier 1:
The default DMX value of 128 (50%) = no adjustment. Values below the midpoint scroll left, increasing in speed as you
approach 0. Values above the midpoint scroll right, increasing in speed to 255 (100%).
Modifier 2:
The default DMX value of 128 (50%) = no adjustment. Values below the midpoint scroll down, increasing in speed as
you approach 0. Values above the midpoint scroll up, increasing in speed to 255 (100%).
Modifier 3:
Scales the image from 0 = no adjustment to maximum tiling at 255.
5.2.14 Flip
Effect Mode
parameter DMX value = 83
This effect inverts the media file texture horizontally or vertically independent from the 3-D object it overlays.
Modifier 1:
DMX values from 0-127 have no effect. DMX values of 128 (50%) to = 255 (100%) flips the image horizontally.
Modifier 2:
DMX values from 0-127 have no effect. DMX values of 128 (50%) to = 255 (100%) flips the image vertically.
Modifier 3:
Not used
This effect is also available as a Visual Mode adjusted with 2 Modifier parameters, (see Film Roll on page 77).
Object Effect Global Effect
Original Content
Modifier 1 parameter DMX = 157
Modifier 2 parameter DMX = 94
Modifier 3 parameter DMX = 26
Object Effect Global Effect
Object Effect Global Effect
Original content
Modifier 1 parameter DMX = 128
Modifier 2 parameter DMX = 0
Modifier 1 parameter DMX = 128
Modifier 2 parameter DMX = 128
To Next Page
Loading...