Security
242
7.1
Protection for the configuration
BAT54-Rail/F..
Release
7.54
06/08
U Limit the network configuration access
The access to the internal functions can be controlled separately for access-
es from the local or from remote networks - for all configuration services sep-
arately. The configuration access can generally be permitted or forbidden, a
pure read access or - if your model is equipped with VPN - also can be per-
mitted only over VPN.
Note: If you want to remove the network access to the router over the WAN
completely, set the configuration access from distant nets for all methods
to 'denied'.
You can reach the configuration of the access-list of WEBconfig or Telnet
with the following runs:
Configuration tool Run
WEBconfig Expert Configuration
 Setup Config  Access-list
Terminal/Telnet
/Setup/Config-Modul/access-list
To Next Page
Loading...
Need help?
General
