More services
BAT54-Rail/F..
Release
7.54
06/08
12.9
RADIUS
505
U Dial-in using PPP and RADIUS
When dialing-in using the PPP protocol (Point-to-Point protocol), RADIUS
can be used to check client access authorizations. A client can dial-in to the
network from anywhere. The resulting data transmission between client and
authenticator is encrypted.
D Radius server [default: disabled]
When authenticating using RADIUS, the user administration and authen-
tication tasks are passed on to a RADIUS server.
D Disabled: The functionality of RADIUS is disabled and no requests are
forwarded to the RADIUS server.
D Enabled: The functionality of RADIUS is enabled and requests may be
forwarded to the configured RADIUS server. Depending on the setting,
other sources may be used for the authentication process (e.g. PPP
list).
D Exclusive: RADIUS functionality is enabled and the authentication pro-
cess is run exclusively by RADIUS.
The appropriate RADIUS server must be configured to use the function-
ality of RADIUS. All user data, such as user name and password, is
entered on the RADIUS server.
D Server IP address
Specify here the IP address of your RADIUS server from which users are
managed centrally.
Configuration tool Call
LANconfig Communication
 RADIUS
WEBconfig, Telnet Expert configuration > Setup > WAN > RADIUS
To Next Page
Loading...
Need help?
General
