Hirschmann BAT54-Rail - Page 522

Appendix
522
13.1 Error messages in LANmonitor
BAT54-Rail/F..
Release 7.54 06/08
Out of memory
x (IKE)
The number of VPN connections has overloaded
the device's memory. To maintain the stability of
the device, no further VPN connections should
be established.
Out of memory
x (IKE)
The number of VPN connections has overloaded
the device's memory. To maintain the stability of
the device, no further VPN connections should
be established.
No rule matched IDs - unknown
connection or wrong ID (e.g. IP
network definition)
x (IKE)
The incoming VPN connection could not be
assigned to a remote device. Please check the
following parameters: ID type does not match
(see this document), incorrect network definition,
VPN rules do not match (see VPN RULES).
No proposal matched
x (IPsec) x (IPsec)
The devices cannot agree on a matching pro-
posal. Please check the settings under "Config-
ure --> VPN --> IKE --> IKE Proposals" and
under "Configure --> VPN --> IPSec parameters
--> IPSec proposal lists".
IPSec PFS group mismatch Please check the PFS (Perfect Forward
Sequence) under "Configure --> VPN --> Con-
nection parameters --> VPN remote identifica-
tion --> PFS Group"
Message Initiator Responder