Wireless LAN – WLAN
BAT54-Rail/F..
Release
7.54
06/08
3.4
Configuration of WLAN parameters
75
U Authentication with EAP/802.1X for BAT Wireless Router in
client mode
In WLAN client operation mode, the BAT Wireless Router can authenticate
to another access point using EAP/802.1X. To activate the EAP/802.1X au-
thentication in client mode, the client EAP method is selected as the encryp-
tion method for the first logical WLAN network.
D Client EAP method
Select the desired client EAP method here. Please observe that the
selected client EAP method must match the settings on the access point
that the BAT Wireless Router is attempting to log onto. The following val-
ues are available:
D TLS
D TTLS/PAP
D TTLS/CHAP
D TTLS/MSCHAP
D TTLS/MSCHAPv2
D TTLS/MD5
D PEAP/MSCHAPv2
Configuration tool Call
LANconfig Wireless LAN
802.11i/WEP WPA or private WEP settings Wireless network 1
WEBconfig, Telnet Expert configuration > Setup > Interfaces > WLAN > Encryption > WLAN 1
To Next Page
Loading...
