System Operation
3-62
GNS-XLS Flight Management System
Rev. 6
Jul/98
4. BACK Key - DEPRESS to
display the INTERCEPT?
prompt. (Figure 3-105)
5. ENTER Key - DEPRESS.
The cursor moves to the
TO field.
6. BACK Key - DEPRESS
until the FAF waypoint is
displayed.
7. ENTER Key - DEPRESS.
8. Enter the inbound final approach course in the DTK field if required.
9. ENTER Key - DEPRESS Twice to return to Navigation Page 1.
NAVIGATION Page 1 will be displayed with the TO waypoint, the
FAF, and waypoint previous to the FAF in the FR field if no manual
DTK was entered. The system will now intercept the Final
Approach course and sequence to the MAP.
NOTE: If an intercept is programmed to a FAF that is part of a
Procedure Turn the DTK must be manually entered. This will cause
PSEUDO VORTAC to be displayed on NAV Page 1.
HDG 205
INTERCEPT ?
FAF
TO DRK DTK 125
OK? ENTER
HEADING VECTOR 1/1
>
<
<
<
Figure 3-105
To Next Page
Loading...
Need help?
General
