Honeywell GNS-XLS - Turning AUTO REPORT; Auto Wx Update off

Rev. 3
Sep/96
7-44
GNS-XLS Flight Management System AFIS Operation
TURNING AUTO REPORT / AUTO WX UPDATE OFF
1. AFIS Key - DEPRESS to
display AFIS MENU Page.
2. Line Select Key - DEPRESS
to position cursor over
Option 8, OPERATING
MODES. (Figure 7-79)
3. ENTER Key - DEPRESS.
4. Line Select Key -
DEPRESS to position cur-
sor over ON option of
AUTO REPORT or AUTO
WX UPDATE field. (Figure
7-80)
5. BACK Key - DEPRESS.
OFF appears in the cursor.
(Figure 7-81)
6. ENTER Key - DEPRESS to
turn OFF the AUTO
REPORT or AUTO WX
UPDATE function.
NOTE: If all networks are OFF,
then AUTO REPORT and
AUTO WX UPDATE will be
OFF.
AFIS OPERATING MODES
AUTO REPORT ON
AUTO WX UPDT ON
VHF NETWORK ON
SAT NETWORK ON
ACTIVE LINK: ARINC
>
>
>
Figure 7-80
AFIS MENU
<
<
<
<
1 AFIS FLT PLAN
2 SIGMETS
3 TERMINAL WX
4 WINDS ALOFT
5 RECALL AFIS FPL
6 SEND AFIS MSG
7 DISPL AFIS MSG
8 OPERATING MODES
Figure 7-79
AFIS OPERATING MODES
AUTO REPORT OFF
AUTO WX UPDT ON
VHF NETWORK ON
SAT NETWORK ON
ACTIVE LINK: ARINC
>
>
>
Figure 7-81