Honeywell GNS-XLS - Dispatch Review;Update

DISPATCH
REVIEW/UPDATE
1. AFIS Key - DEPRESS, if
necessary, to display the
AFIS MENU Page.
2. Line Select Key -
DEPRESS to position the
cursor over DISPATCH.
See Figure 8-17.
3. ENTER Key - DEPRESS.
The DISPATCH MENU
Page is displayed. See
Figure 8-18.
4. Line Select Key -
DEPRESS to position the
cursor in the NEED
RELEASE field.
NOTE: The Line Select Keys
may be used at any time to
enter or change data.
5. Press the BACK or * Key
to select (an asterisk is dis-
played if selected) for
release from the gate. Press BACK or * to deselect.
6. ENTER Key - DEPRESS. The cursor will automatically move to
the NEED FLIGHT PLAN field.
7. Press the BACK or * Key for selection (an asterisk is displayed if
selected) if a new AFIS flight plan needed. Press BACK or * to
deselect.
8. ENTER Key - DEPRESS. The cursor will move to the MANUAL
RELEASE field.
9. Press the BACK or * Key for selection (an asterisk is displayed if
selected). Press BACK or * to deselect.
10. ENTER Key - DEPRESS. The cursor will move to the AMEND
RELEASE field.
8-19
GNS-XLS FMS with Regional Airline AFIS
Rev 4
Sep/97
>
WGT/BAL INITIALIZE
STATION DVT/HOLD
WEATHER CLOSE OUT
DISPATCH
SEND MSG
DISPLAY MSG
20:09 AFIS MENU
<
><
<
< >
<
Figure 8-17
>
><
>
>
NEED RELEASE
NEED FLIGHT PLAN
MANUAL RELEASE
AMEND RELEASE
AIRPORT ANALYSIS
TRANSMIT
20:14 DISPATCH MENU
< >
<
<
<
Figure 8-18